?interlaminar

interlaminar 发音

[[intə'læmənə]]

英：　　美：

interlaminar 中文意思翻译

interlaminar 相似词语短语

1、interlinear ─── adj.行间书写（或印刷）的；（书）用不同语言排行对照的；n.用不同语言排行对照的书

2、interlaminated ─── v.插于层间；置于交错薄片间

3、interlaminate ─── v.插于层间；置于交错薄片间

4、interlaminates ─── v.插于层间；置于交错薄片间

5、interliner ─── 中转换机旅客

6、interlunar ─── adj.看不见月亮期间的

7、interlaying ─── v.放在……之间，嵌入；n.垫衬；中垫

8、interlacing ─── n.交错，隔行；隔行扫描；v.交错，交织（interlace现在分词）

9、interlaminating ─── v.插于层间；置于交错薄片间

interlaminar 常见例句（双语使用场景）

1、EXPERIMENTAL STUDY ON THE INTERLAMINAR TENSILE PROPERTIES FOR A KIND OF CARBON FIBER WOVEN REINFORCED COMPOSITE UNDER IMPACT LOADING ─── 一种碳纤维织物增强复合材料的层间冲击拉伸力学性能实验研究

2、Three-dimension braided composites have high interlaminar shear stength and high damage tolerance.Crack spread can be resisted by 3-D braided composites. ─── 摘要三维编织复合材料具有高的层间剪切强度，高的损伤容限和显著的抵抗裂纹扩展的能力。

3、Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites ─── 单向纤维增强聚合母体复合材料I型层间断裂韧性的标准试验方法

4、Keywords Interlaminar hybrid;Composite;Mechanical property;Experiment; ─── 层内混杂;复合材料;力学性能;实验;

5、Keywords compound ultrafine fibers;co-axial electrospinning;interlaminar interface;composites;bending property;interlaminar shear strength;impact toughness; ─── 复合纳米纤维;同轴共纺;层间界面;复合材料;弯曲性能;层间剪切强度;冲击韧性;

6、Keywords C_f/epoxy tube;hoop interlaminar shearing stresses;axial interlaminar shearing stresses;FEA; ─── 关键词碳/环氧管;环向层间剪应力;轴向层间剪应力;有限元分析;

7、Keywords ablative material;carboncarbon;carbonpheno lics;interlaminar shear strength; ─── 烧蚀材料;炭/炭;炭/酚醛;层剪强度;

8、Keywords Composite laminates;Interlayer toughening;Interlaminar fracture toughness;J integral;Interfacial failure; ─── 关键词复合材料层合板;层间增韧;层间断裂韧度;J积分;界面失效;

9、Interlaminar stresses of the free corner effect in laminates--a semi-analytical solution ─── 层合复合材料自由角附近的层间应力场--一个半解析解

10、The value of the thermal expansion of interlaminar and sandwich hybrid composites decreases with increasing carbon fiber content. ─── 发现层间和夹心混杂复合材料的热膨胀量随炭纤维相对含量的增加而减少；

11、interlaminar shear ─── 层间剪切

12、The damage of the composite plane with cutout is mostly caused by the interlaminar fracture around the hole. ─── 开口的损伤也主要是由孔边的层间失效引发的,开口缝合补强的引入,可以改善孔边的层间力学性能。

13、INTERLAMINAR SHEAR FRACTURE OF CSM-GRP ─── CSM玻璃钢层间剪切断裂

14、interlaminar separation ─── 层间分离

15、Interlaminar stresses distribution around the hole ─── 孔边层间应力分布

16、Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method. ─── 织物增强塑料复合物.短束法对表面内层剪切强度的测定

17、interlaminar shear strength ─── 层间剪切强度

18、The development and application status of the test method for interlaminar shear strength of laminates was introduced; practical importance of its study was pointed out. ─── 本文介绍了层合板复合材料层间剪切强度测试与评价方法的发展和应用现状，指出了研究层合板复合材料层间剪切强度测试与评价方法的理论和实际意义。

19、Keywords polymer materials;AS4/PEEK;three-dimensional viscoplasticity model;interlaminar stress;damage mechanism; ─── 复合材料;AS4/PEEK;三维粘塑性模型;层间应力;损伤机理;

20、The interlaminar transverse shear stresses are the main factor, which leads to the delamination of laminated plate in the lower free vibration frequencies. ─── 在低阶模态振动下，横向剪应力是造成层合板脱层的主要原因;

21、Interlaminar fracture toughness ─── 层间断裂韧度

22、Methods: 18 patients of odontoid fracture associated with atlantoaxial dislocation were treated with C1-2posterior cervical fusion,including 7 Gallie fusion,7 Brooks fusion and 4 Apofix interlaminar clamp applications. ─── 方法：对18例齿状突骨折并寰枢椎脱位患者行寰枢推后路融合术：包括Gallie钢丝法7例，Brooks钢丝法7例，Apofix椎板夹内固定法4例。

23、For the compression in the direction along the fiber yarns, the maximum interlaminar shear stress occurs at the interlacing junctions of the yarns. ─── 对于沿纤维束方向的压缩,在经纬向纤维束相互交替处有较大的层间剪应力。

24、Keywords delamination;hygrothermal;interlaminar fracture toughness;laminate;energy release rate; ─── 混合型分层;湿热;层间断裂韧性;层压板;能量释放率;

25、STUDY ON THE INTERLAMINAR STRESS AND WARPAGE DEFORMATION IN LAMINATED OBJECT MANUFACTURING ─── 分层实体制造中层间应力和翘曲变形的研究

26、ANALYTIC SOLUTIONS TO MEAN INTERLAMINAR SHEAR STRESS OF CROSS-PLY LAMINATE UNDER COMPRESSION LOADS ─── 正交层合板压缩条件下平均层间剪应力计算

27、Indirect methods to measure the interface bond strength include the interlaminar shear strength test. ─── 测量界面粘结强度的间接方法包括层间剪切强度试验。

28、This may serve to forcast the thin-coal bed zone of structure in working pits by using interlaminar slip structure . ─── 对生产矿井利用层滑构造预测构造薄煤带具有实际指导作用。

29、interlaminar strength ─── 层间剥离强度

30、scleral interlaminar implant ─── 巩膜层间充填

31、Keywords C/C composites;impregnation;interlaminar shear strengths （ILSS）;microstructure; ─── 炭/炭复合材料;浸渍;层间剪切性能;显微结构;

32、Objective: To explore the effect of enlarge windowing the interlaminar spaces for decompressing and internal fixation of AF(atlas fixator) system,for the patients of thoracolumbar fractures. ─── 摘要：目的探讨椎板间扩大开窗减压并AF系统内固定术治疗胸腰椎骨折的效果。

33、Odontoid fracture and atlantoaxial instability treated with interlaminar clamp system ─── 板夹系统治疗齿状突骨折伴寰枢椎不稳

34、In order for the solution of the laminated plates and shells to ensure interlaminar continuity of the physical variables, the transfer matrix technique was used. ─── 针对层合板壳问题，为了保证各层之间物理参量的连续性，进一步应用了状态转移矩阵技术。

35、Research on the Interlaminar Short Fiber Toughened Composite Panel Under Impact Load ─── 冲击载荷作用下层间短纤维增韧研究

36、Experimental Characterization of Mixed-Mode Interlaminar Fracture in Composite Materials ─── 复合材料混合模式分层断裂的实验表征

37、interlaminar fracture ─── 层间断裂

38、Keywords composite laminates;stitching;mode II interlaminar fracture toughness;crack growth resistance; ─── 复合材料层合板;缝合;II型层间断裂韧性;裂纹扩展阻力;

39、The double contilever beam (DCB) test,the end notched flexure (ENF) test and the mixed mode bending (MMB) test were conducted to determine the interlaminar fracture toughness and the failure locus in mixed mode for the two composites. ─── 在研究中进行了双悬臂梁（DCB）试验、端边切口（ENF）试验和混合模式弯曲（MMB）试验，以确定此两种复合材料的层间断裂韧性和混合模式断裂曲线。

40、Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics ─── 玻璃纤维强化塑胶层间剪切力测量方法

41、The influence of piezoelectric layer on interlaminar stresses is discussed and then the voltagedistribution on piezoelectric sensor is obtained in the presence of delamination. ─── 文中首先讨论了压电薄膜层对层合板层间应力的影响，然后在存在分层裂纹的情况下，计算了压电层的电压分布。

42、Keywords composite laminate;interlaminar stress;delamination;transverse crack;overload.; ─── 复合材料层板;层间应力;分层;横向裂纹;超载;

43、The spring of “Jumper stilts ” is proved to be in a very good condition by the following data: flexural strength, flexural modulus, interlaminar strength. ─── “飞蝗腾达”弹跳器弹跳鞋弹跳跷的弹簧，经过以下测试数据表明，在弯曲强度，弯曲模量，层剪强度方面都处于良好状态。

44、interlaminar shear stress ─── 层间切应力

45、INTERLAMINAR FRACTURE TOUGHNESS OF MULTI-DIRECTIONAL LAMINATES ─── 多向层合板层间分层断裂韧性研究

46、Test method for interlaminar shear strength of glass fiber-reinforced plastics ─── 玻璃纤维增强塑料层间剪切强度试验方法

47、interlaminar improvement ─── 层间增强

48、interlaminar approach ─── 椎板间入路

49、Key words: Thoracolumbar fracture;Internal fixation; Enlarge windowing the interlaminar spaces ;Vertebral decompressing; AF system. ─── 关键词：胸腰椎骨折；内固定；椎板间扩大开窗；椎管减压；AF系统

50、Keywords interlaminar hybrid;laminated thin cylindrical shell;fie-cural property;torsional property; ─── 层间混杂;层压薄壁圆筒;弯曲特性;扭转特性;

51、Keywords cryomechanics;glass-cloth/epoxy laminate;interlaminar shear strength;short beam shear test;shear stress distribution;finite element method; ─── 低温力学;玻璃纤维织物强化树脂层合板;层间剪切强度;短梁剪切试验;剪切应力分布;有限元法;

52、interlaminar stress ─── 层间应力

53、the treatment makes the interlaminar shear strength of the composite increased 17.5% and the linear ablation rate decreased 58.6%. ─── 该方法是提高复合材料层间剪切强度和抗烧蚀性能的有效方法，它可使层间剪切强度提高17．5 ％ ，线烧蚀率减小58．6 ％ 。

54、Methods 19 cases with lumbar instability were treated by posterior interlaminar fenestration, interbody bone graft, and facet joint arthrodesis with translaminar screw fixation. ─── 方法对19例退行性腰椎不稳患者采用后路椎板开窗减压,椎间植骨融合,经椎板关节突螺钉固定。

55、The results conclude in that the interlaminar crack exhibits as a mode E crack and delamination will lead to a remarkable reduction... ─── 本文同时还分析了层间摩擦系数的影响,并指出,分层将导致壳体结构承载能力显著下降。

56、Two modes of damage in composite laminates are considered: the intralaminar damage (matrix cracking) and the interlaminar damage(interior delamination). ─── 本文分析了复合材料层板中两种类型的损伤,一种是层内损伤卽基体开裂,另一种是层间损伤卽内部分层。

57、Mechanical properties of different conditions were tested which include tensile, flexural interlaminar shear and dynamic mechanical performance. ─── 对碳纤维增强聚苯硫醚复 合材料拉伸性能、不同条件下的剪切性能和弯曲性能进行了研究。

58、Keywords orthotropic material;interlaminar fracture;stress intensity factor;bielastic constant;interface crack; ─── 正交异性材料;层间断裂;应力强度因子;双弹性常数;界面裂纹;

59、abstract: Objective To investigate the clinical effects of potential of dredging interlaminar fenestration expand lumbar spinal stenosis. ─── 目的观察椎板开窗潜挖式椎管扩大术治疗腰椎管狭窄症的临床效果。

60、Interface cracking, sometimes also called delamination or interlaminar cracking, is considered as one of the most commonly encountered types of damage in the failure of piezoelectric composites. ─── 本论文主要对压电材料断裂力学以及压电功能复合材料界面断裂力学中存在的一些基本问题进行分析研究。

61、After test, it only falls by 10% for the comparison of interlaminar strength and flexural modulus, the elasticity, durability and stability are still in good condition. ─── 在测试后，弯曲强度和弯曲模量，层剪强度的对比只下降了10%，其弹性，耐用度，稳定性方面还处于良好状态。

62、Numeric analyses for interlaminar stresses of the free corner effect in laminates ─── 层合复合材料自由角附近层间应力场的数值分析

63、Keywords composites;laminates;free-edge effect;interlaminar stress;experimental study; ─── 关键词复合材料;层合结构;自由边效应;层间应力;实验研究;

64、interlaminar liquid ─── 泡沫层间液体

65、interlaminar blister ─── 层间气孔

66、Keywords Laminates;Interlaminar Fracture Toughness;Stitch;Double;Cantilever Beam Test （DCB）;Testing and Evaluating Methods; ─── 复合材料层合板;层间断裂韧性;缝合工艺;双悬臂梁;DCB;测试与评价;

67、The interlaminar fracture between two dissimilar orthotropic composite materials interface crack problem subjected to symmetric loadings is studied. ─── 摘要研究了两种不同的正交异性复合材料板受对称载荷作用的界面裂纹问题。

68、interlaminar toughness ─── 断裂韧性

69、In this paper, the orthotropic bimaterial interlaminar fracture problem is studied by using theory of complex function. ─── 摘要采用复变函数方法研究了正交异性双材料层间断裂问题。

70、Experimental posterior interlaminar spinal fusion in rabbits with a new biomimetic grafting material ─── 仿生活性人工骨诱导兔椎板间多节段脊柱融合的研究

71、interlaminar interface bonding ─── 层间界面结合

72、Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces ─── 利用相邻的两个测试表面测定绝缘覆层层间电阻的标准试验方法

73、The method to determine the interlaminar shear strength for composite material is also proposed by five-point bending test, and the experimen... ─── 同时，文中提出了用五点弯曲实验测试层间剪切强度的方法，给出了实验结果。

74、Treatment of degenerative lumbar canal stenosis by segmental interlaminar fenestration and undercutting of the nerve root canal ─── 椎板间隙开窗及神经根管潜行减压治疗退行性腰椎管狭窄症

75、interlaminar short fiber ─── 层间短纤维

76、In this paper, interlaminar stresses in laminated plateis solved by using of the three dimensional anisotropic finite elementprogram. ─── 用三维各向异性有限元程序求解多层层合板层间应力是与复合材料层合结构的强度紧密相关的。

77、The materials with proper module can decrease the interlaminar transverse stresses, especially transverse normal stress in the plates. ─── 采用适当模量材料的层合板能有效地降低横向应力，特别是横向正应力。

78、Interlaminar shear fracture of chopped strand mat glass fibre reinforced polyester laminates (CSM-GRP) was studied both experimentally and analytically. ─── 本文对CSM-GRP层间剪切断裂用实验与分析方法进行了研究。

79、aerospace series . carbon fibre reinforced plastics . unidirectional laminates . determination of the apparent interlaminar shear strength. ─── 航天航空系列。碳纤维增强塑料。单向层压板。表观层间剪切强度的测定。

80、Keywords laminate;fractography;cleavage step;river pattern;interlaminar failure; ─── 层合板;断口形貌;解理台阶;河流状花样;层间破坏;

81、Keywords composite laminates,thermoplastic-particle interlayer toughening,interlaminar fracture toughness,damage resistance,toughening mechanisms,finite element analysis; ─── 复合材料层压板;层间颗粒增韧;层间断裂韧性;损伤阻抗;增韧机理;有限元;

82、In the range of incident velocities near to the perforation limit velocity (V50), this mechanism depends on thickness and interlaminar shear strength of composite plate. ─── 在接近穿孔极限速度的入射速度(V50)范围内，这一机制依赖于复合材料板的厚度和中间层剪切强度。

83、M.N.Bureau,F.Perrin,J.Denault,J.I.Dickson,Interlaminar fatigue crack propagation in continuous glass fiber/polypropylene composites,International Journal of Fatigue,24,104(2002 ─── 张定安,马胜,丁辛,王依民,黄麻纤维增强聚丙烯的力学性能,玻璃钢/复合材料,2,3(2004

84、medial interlaminar nucleus ─── 内侧板内核

85、Apofix Interlaminar Clamp in Atlantoaxial Instability ─── Apofix椎板钩在寰枢椎不稳治疗中的应用

86、The results showthat the interlaminar shear delamination failure is the dominant damage mode and ... ─── 此外，还定性地分析了损伤的稳态扩展与失稳扩展。

87、Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures ─── 1-D和2-D连续的纤维加强的高级陶瓷层间的剪切强度试验方法

88、The interlaminar shear characteristics of three kinds of hybrid composites was investigated.The theoretical distribution of interlaminar shear stress of hybrid composites was presented. ─── 对三种类型的混杂纤维复合材料层压板的层间剪切特性进行了试验与研究,从理论上描述了层间剪切应力分布状态。

89、Therefore, the main influence factor arouse the pavement early damage in steep slope road sections is interlaminar shear stress. ─── 因此，引起陡坡地段路面产生提前破坏的主要因素为层间剪应力。